Quote:
Originally Posted by drunkenup
So I have dinan plates on stock top hats, so overall strut height is probably at least 5mm higher without them. I am at 11 threads from the bottom and that gives me about 1.5 finger gap. Without the dinan plates I'd probably be around a 1 finger gap since the entire strut is shorter. Dinan plates and nothing else netted me -2.1 deg camber.
This is ET40 with a 245/35-18... if the tire were any taller it would risk hitting the collars. I am actually going to go to ET35 since I have the fender room to spare.
|
this is the exact setup i want to run. are you on the 7 inch front springs? Any more picures you could share? outside drop. fender clearance? ... m3 control arms or not? ( sorry if i missed that.)