Quote:
Originally Posted by joeo
Here is my current setup - I used a Derale oil cooler (DER-51610 at 6.8x13x2 inches). Made AN lines from stainless braided AN10, and welded a bracket up to attach the cooler to where the horns used to go. I moved the horns to the front.
I used some metal grating to make a cover for the cooler. Lots of trial and error fitting!
-Joe
|
Nice setup. But the AN piping is bigger than stock and the cooler is likely less resistive than stock, which is likely why flow is favoring the new path.