Quote:
Originally Posted by asbrr
Quote:
Originally Posted by tehrui
My first gear appears to be shot as it is constantly popping out of gear. Had the dealer take a look early on when it happened less often and was told the transmission is on its way out and was quoted a hefty price to replace it.
Lately its gotten worse and worse. I've located a replacement transmission online with low miles (~40k) and have a local shop that can do the work.
While I am replacing the transmission I plan to do the clutch as well since it, too, is on its way (car has ~120k miles). I was told I should do the flywheel as well. Does anyone have any recommendations on what I should go with? OE replacement? Aftermarket? Also, anything else I should get done while the transmission is out?
Vehicle is a 2009 128i (N51)
Thanks in advance!
|
Take a look at the Valeo single mass flywheel & clutch package. Very good price for a new clutch/flywheel combo, same characteristics as stock, more reliable/longer lasting because of the single mass flywheel design. It will however be a bit noisier (more gear lash noise).
You can upgrade your transmission mounts for relatively cheap also - either M3 or Rogue Engineering rubber transmission mounts for example.
Last but not least, rebuild the full shifter mechanism, including uprated bracket bushings, upgrade to a DSSR maybe, shifter bushings, coupler etc etc.
|
Dunno if it is worth the cost to do all of that especially if your car has 120k miles and car net worth is 8k-9k at most. With all that work be 5-6k or more.
I would just keep driving it until it can't drive anymore and deal with the transmission until that happens or find a good deal....shop around, a repair shop would love to do a transmission work in this economy, see if you can get a reasonable price.