Quote:
Originally Posted by dzid_
C0C_DBC_MIN_AUSLOESEDRUCK is set to 0 on mine and according to NCS Dummy it is the only available option. But mine is MK60_87.C0C which I believe is newer DSC firmware version. Yours was the last one that had 01 as default. Did they remove this safety feature?! I would prefer to have it during normal driving.
By assuming, the letters correspond to firmware version, there are quite a few newer firmware versions available (according to NCS dummy). Now I want to upgrade the firmware!! since I have other issues:
#1 sudden short negative torque intervention on the first wheel spin and then it is normal.
#2 When Sport button is On AND DTC is On, the throttle response is no longer sporty ( link) |
Are you getting torque intervention with dsc completely disabled?
Yes your firmware would be year and model specific. I have a 2007.
I only had 1 value for my car too.
I manually added the data value 00. The range is hexidecimal 00-FF. FF being the most intrusive braking action. 00 being the least intrusive. Hover your mouse over the wert to see what the value is. The wert is just a label not the function and doesnt mean much. The value is what controls the feature.