Quote:
Originally Posted by E82Performance
What I don’t understand is that I own an e82 125i 2008 (EU-spec) and when I take a look under the hood it seems that I have the DISA connector on the IM.. Is this possible?
I also have the performance intake and a custom dyno map. (292hp at 6278rpm @ 32 degrees Celsius ambient temperature)
When I drive and check via the OBD meter i have approx 360nm engine torque at 6881rpm.
It also shows clutch torque approx 320nm at 6881rpm.
(320nm x 0.738) x 6881rpm / 5252 = 309HP at 8 degrees Celsius ambient temperature.
Ps.
I always use BP Ultimate 98.
|
Not going to happen.
DME is reporting calculated torque. Probably before estimated losses for friction and such. You can also mess with these values by changing the torque look up maps.
You"ll need a three stage manifold, headers and a really good tune to squeak 290 HP at the crank.