If this is your first time reading this,
and you want to code your car like the examples below,
send me a PM, I can assist.
------
Okeeey dokey
so today with the help of a friend who has an D-CAN OBDII cable,
I ran NCS Expert on my 2009 E82 135i,
Module: Cas
ECU Module: NFRM
-> Disabled Cold Start Low Beam Bulb Check
(Hopefully stop the bulb warnings after installing LEDs into the DEPO aftermarket headlights)
ECU Module: Kombi
-> Enabled Digital Speed
Won't know if the bulb check disable worked till I do a proper cold start tomorrow,
but pretty happy overall.
You don't see a lot of 135i owners talking about coding,
so I wanted to share this experience and offer basic assistance to anyone considering coding their car
Theres a lot of things you can do, a few below in case you're interested
* Euro Corner Delete
* Digital Speedometer on Cluster
* Roll up the window while holding lock on remote
* Eliminating the ignition key dong
* Folding mirror while holding lock on remote
* Eliminating iDrive accept message on pre 09 units.
* Unlock doors when car is turned off... No more double pull on handle needed!
cheers
LOL edit: semi cold start just now and the bulb errors still there
Think I missed the correct bulb check in config
can someone advise?
below are all the KALTUEBERWACHUNG (cold bulb monitor) from my NFRM module trace file
Quote:
KALTUEBERWACHUNG_BL_M_1
nicht_aktiv
KALTUEBERWACHUNG_KZL
nicht_aktiv
KALTUEBERWACHUNG_NSL_L
aktiv
KALTUEBERWACHUNG_NSL_R
aktiv
KALTUEBERW_RL_BL_1
nicht_aktiv
KALTUEBERW_RL_BL_2
nicht_aktiv
KALTUEBERWACHUNG_AL
nicht_aktiv
KALTUEBERWACHUNG_BFD
aktiv
KALTUEBERWACHUNG_BL
aktiv
KALTUEBERWACHUNG_BLK_H
aktiv
KALTUEBERWACHUNG_BLK_V
aktiv
KALTUEBERWACHUNG_IB
nicht_aktiv
KALTUEBERWACHUNG_RFS
aktiv
KALTUEBERWACHUNG_SL_V
aktiv
|