Quote:
Originally Posted by BimmerAg
Genuine BMW front rotors are $150 each
Pads + wear sensor $180
~3hrs labor at $120/hr
Total: ~$850
You could bring that down by a couple hundred bucks by going with OEM parts (Zimmerman, Textar) if you and your shop are comfortable with that
|
OP says just front Rotors though, An indy should be able to do both sides in less than 1hr, so using rates previously shared, should be about $450.
Steps to replace the rotor is to remove wheels/tires, remove calipers and hang out of the way, undo one screw holding rotor, remove rotor, clean and prep to install new rotor, install new rotor, put caliper and wheel/tire back in reverse order. Not very hard at all.
FWIW, the last set of rotors I bought were R1 concept slotted at about $280 shipped for the pair.