I refer to my post above about the 'gap' difference between the tailpipes (driver side gap is a little smaller than the passenger side gap) (
http://www.1addicts.com/forums/showp...0&postcount=27).
The gap between the tailpipes should be equal on both sides.
I know already of three 1M Akra exhausts who feature
exactly the same 'gap' difference phenomenon. Can others also check their 1M Akra ? Do know that it's marginal, but it's there - take a closer look to notice the difference. If this happens to be case (and thus every 1M Akra features the 'gap' difference), than it appears that the Akra factory mold (for shaping the titanium axle back exhaust) was/is not 100% accurately conceived.
