Quote:
Originally Posted by vtl
Will be a fun job, have you got a friend to help?
Pressure plate screws are normally included with the clutch kit, did it come in the box? If not then go ahead and buy them, they 100% need to be replaced. Torque is 15Nm + 90 degrees.
Flywheel bolts are 120Nm. I also used red loctite.
Torque specs all came from the BMW ISTA documentation.
You'll need to make a tool from from your local hardware store. I've seen people drill a hole through an L shaped steel bracket and bolt it to the engine and engage it on one of the teeth of the flywheel.
|
I will order both right now.
Ill give the that L bracket some thought and see what I come up with.
Thank you!