Quote:
Originally Posted by Sarge135
Awesome!! Glad you got it done. Post some pics on how you did it.
|
Here is one crappy pic I have. I tucked everything in so its all hidden.
I just bought a $6 4-pin automotive relay at Autozone and use it to channel a constant 12v.
I used the pin configuration:
Pin #30: Constant 12v source (I just tapped to the yellow wire for the Dynavin I had to connect to the battery.)
Pin #85: Ground source (I just ran a wire and bolted to on one of the tail light bolts)
Pin #86: Switch source (I connected this to the black/violet wire from the tail light harness.)
Pin #87: The device you trying to power (I connected this to the red wire to the reverse camera)
Hope this helps people trying to install a reverse camera.