Quote:
Originally Posted by duder13
I was a little worried about NVH and the raise in height using camber plates. Removing the tower pins and getting M3 arms was the direction I wanted to go for some camber, but maybe I'm wrong.
|
Fixed Dinan camber plates will not increase NVH, since the factory strut bearing is still used. THey are simply a plate that goes in between to change the camber angle. You will gain about 5mm of ride height at the front, which can help even out rake that is seen with some spring kits.
I have the B12 Bilstein kit (B8 shocks and EIbach pro kit springs), and my car is very even front to back with the Dinan camber plates.