Quote:
Originally Posted by Kgolf31
You are correct on this. 10mm is really min. They probably make a 8mm that is hubcentric but I wouldn't run them
|
I found a place in Canada that produces them to you spec, and he can make me 7 or 8mm hubcentric spacers out of 6061 t6 aluminium like the Turner or the BMS ones.
email address of the vendor is centerbore AT hotmail DOT com
Here is his ad :
http://www.kijiji.ca/v-other-auto-pa...ors/1056290058
Turner spacers:
http://www.turnermotorsport.com/imag...H9905013_2.jpg
BMS spacers:
http://n54tuning.com/index.php?_a=viewProd&productId=62
__________________
2011 X3 35i with M pack + 2011 135i w/6SPMT | 255 square tire setup | Quaife 3.46 LSD | Diff lock down bracket | Bilstein B8+Swift SpecR springs+H&R FSB | CDV delete | BMS Oil Tstat bypass | ER FMIC & CP | N54Tuning DP | GC Street Camber Plates | M3 FCA +guide rods+RSFB's+Tranny mounts | Manzo toe arms | Cobb Stg2 agressive tune | Hawk DTC70 brake pads | RB SS brake pistons | Goodridge SS brake lines | Custom brake cooling ducts