|
Hi all,
I'm hoping you can clear a couple things up for me.
I have an 08 123d with the 3 bar LED rear lights, as shown in the OP. my driver side LEDs are now not working and I've confirmed it's the board as volts are reaching the circuit board, but no light. There fore replacement, right? So I'm taking the opportunity to upgrade to blacklines.
As my car already has LED running lights fed from the second wiring loom, will I need to do any coding with the LCIs? As I assume it should just be plug and play. I do not have Xenons on the front if this affects anything?
cheers
|