rear subframe bushing removal tool or repair shop
Hello,
new to the 1 series community, a former E39 owner. So have had the car for 6 months, and did quite of research on the issues with the chassis car. I have 2012 128i with only the M sport option, no nav, no power seats, and no sunroof. I picked up dinan camber plates and whiteline poly rear subframe bushings, not the inserts.
So I want to try to do this myself, as I typically do most repairs except tires to rim or alignment, but was wondering if someone has the bushing removal tool, or would allow me to rent it?
or if some knows have a shop that has done this before, is reasonable in the GTA, would appreciate any insight. I was quoted $600 from an indy shop, and dealer was 10 hrs @ $160 shop rate.
With these bushing, one does not need to remove the entire subframe, but just lower it, as they are cut in half.
Any help would be greatly appreciated. thank you in advance for reading and your potential input.
Que
|