I got BMW Std Tools loaded and coded a battery change in NCSExpert. Not too involved. Actually getting the software and cable driver all up and running was more difficult than changing the battery capacity.
WARNING: You can register a battery change in INPA a little too easily. When you hit register a battery change it is done. No taking you to another dialog box, no "are you sure" type warnings. It didn't matter for me as I only had 200km on the new battery, but if someone hit this with a much older battery it would be an issue.
Didn't change the VO but I've double checked and the system shows the 80Ah battery as I wanted.
__________________
E82 / BMWP Springs / Koni Yellows / M front control arms / Adjustable front endlinks / M rear guide rods / Whiteline Poly RSFB
|