Quote:
Originally Posted by asbrr
Take a look at the Valeo single mass conversion kit, comes with everything you need and will last longer/will be more reliable than the factory dual mass flywheel kit. It's also way cheaper....and from reports, clutch action is more progressive/better.
Only downside is a bit more noise / chuntering at idle (because of the single mass flywheel). The flywheel is not lighter, just a single mass design (it's the same weight as the dual mass stock unit).
Example: https://www.ecstuning.com/b-valeo-pa...it/835115~val/
HTH
|
Chattering has always been the biggest turn off for me on lightweight flywheel.....only took me 2-3 different installs to figure that out.
If that one weighs the same, wonder where the noise is coming from?