Quote:
Originally Posted by ArightDoom
Wait, so does that mean I need to replace my 10 amp fuse with a 2amp fuse is I JUST have that fuse in there? If I remember correctly it's in slot 8 (or whichever the acc slot is on the 128... This was 3 months ago at this point).
|
Yes, I would put a 2 AMP fuse in there instead. I would recommend a 1A fuse, but the add-a-fuse device I used recommends 2A as the smallest. Because of this I left the 1A inline fuse in place from my hardwire kit. So i have a 2A then a 1A fuse powering my detector.
Also, as others have stated, there is no reason at all to remove the glove box. Just remove the actuator and let the glove box fall down (gently) all the way. This will save you from removing 6 bolts, a fastener, and a panel.