|
I coded it myself, I set the setting DIFF_LOCK to wert_00 in the DSC module using the a program called ncsexpert on my laptop. This will code the DSC module to not apply the rear brakes as an elsd.
In the case of a quaife (Torsen diff) you'd probably be better leaving it on, as the diff becomes open when a wheel unloads. The ediff can put some load on the diff and allow it to work, assuming the brakes are powerful enough.
In my case the GKN viscolok unit relies on a wheel speed difference to generate enough pressure to compress the clutch packs in the diff, so the elsd would hinder the operation of the unit
|