So, here are pics of the AD Engineering FMIC, the tubing was not welded to the end tanks before install so that they could verify fitment and adjust for the 1M if needed. Any adjustments they make specific to the 1M will be saved with jigs so that they can supply bolt-on FMIC's for 1M's in the future. This unit DOES require that the shroud attached to the front bumper cover be cut, but the black grille will still fully enclose it. It will mount to the radiator shroud tabs in the back.
Stock FMIC:
AD Engineering FMIC, basically similar size core to the back, with an additional 3" depth that is full width and 1" taller than the stock unit:
I will post a final pic and some functional impressions later today after the install is complete.