View Single Post
      01-07-2012, 01:29 PM   #2
Dackelone
European Editor
Dackelone's Avatar
Germany
10624
Rep
22,992
Posts

Drives: N54 e82
Join Date: Feb 2010
Location: Bayern, Germany

iTrader: (1)

Quote:
Originally Posted by 118i View Post
Hi there,

Wonder if you assist. My 2008 E87 118i FL had an oil change done. The oil used was Castrol Magnetec 10W40. The problem I am having is that at 4000km, there seems to less oil in the engine and I need to top up.

I think this oil is too thin, therefore suspect that the oil is being burnt. The car has 42000km now.

Please advise if 5W40 Castrol Edge would be a better grade of oil.
I do not know what BMW recommends.

any info will be apprecisted.

perhaps your engine is just using a little bit of oil. Nothing bad in that. Its normal.

10w40 oil is thicker than 5w40. So no that would not help. Perhaps the oil that is in your engine does not meet BMW specs? It must say: BMW Long Life 1 or LL-1 (for high sulfur fuels) or BMW Long Life 4 or LL-4 (for low sulfur fuels)

and have: API SM and ACEA C2, C3

BMW says you can use any oil that meets the above specs and in these viscosities... 0w40, 5w40, 5w30



http://www.bmwusa.com/Standard/Conte...ngineOils.aspx


Here is a german website that sells the BMW oil very cheap... 6 euros per liter. Normally most dealers will charge 20 to 30 euros per liter!

http://www.oeldepot24.de/catalog/ind...e8a66a81b63e51


PS: I use German Castrol RS Edge 0w40 full synthetic LL-4 oil in my car. You have to be carefull with oils because there are many simular sounding names that ARE different oils. Read the label and make sure it is suited for your car.
Appreciate 0