Quote:
Originally Posted by houtan
Thanks for the review. Do you recall how much caster you were running with the stock fenders or how much you are running now?
I am planning to get a set of RS-Rs, 235/40/18 front. They are really close in size to the sumitomo htr III I currently have in the front (same size). I am running 2.1 degrees camber and my caster is maxed out at 10.1 degrees (TC camber plate, M3 arms). Problem is, I think the effective camber when the wheel is turned is causing the inside of my tires to wear out much more quickly, so I plan to increase the caster back to something in 8 degree range, reducing my effective camber. Just trying to figure out if the RS-R 235 will still clear. I am guessing it will.
|
I just pulled an alignment sheet from when I had this setup. In this photo caster was 7.3 with 3.0 camber.