Quote:
Originally Posted by Arctic Digger
Hi,
I did a quick reassemble and test this morning, and I got the Andream to work (partially).
I got the IDrive controler to work, and the electrical problem warning to go away by switching ON dip switch #4. Dip switch #1 does not seem to do a lot at this moment.
I managed to hook my phone to the mmi using Android Auto.
The problem I still have is that there is no sound. I got the car on AUX as moved the volume to near max, turned on the car volume. I hear some crackle, but no music, or driving direction.
Any idea what could cause this. I figure it is a configuration problem.
|
That's good to hear. I haven't seen the audio issue. But just confirming that you plugged the aux cable coming out of the andream unit into your car, correct?
If that doesn't work. I'd try possibly
1. check your device settings again, make sure DND is disabled, volume is up, android auto is updated, etc
2. try plugging in another device, preferably an iphone to see if it's a device issue
3. try updating the andream unit. it's relatively simple as long as you have a USB. there's guides and links here -
https://f30.bimmerpost.com/forums/sh...9%20site:1.6.9