Quote:
Originally Posted by 1MOz
+1. Parking mode works fine for me too. However, every now and then the P3 gauge will throw a code 2dEd.
Info on this code 2dEd:
Power management, standby current control
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
EXPLANATION: The closed circuit current momentarily exceeds its threshold value when the TCU wakes up to perform the "Stolen Vehicle Recovery" function. This should not cause a discharged battery.
I just clear it via the P3 and unless I run parking mode for a few hours, it doesn't come back.
|
I had that code when I set the Power Magic to "infinite" using the dip-switches. Changed it to 6hrs (which is plenty for me) and seems fine now..