Quote:
Originally Posted by Papa Popov
My 128i w/ M-sport suspension is currently at 107k, and its time to replace the shocks. I'm currently stuck between going with Bilstein B6+stock sport springs, B6 + BMWP or Dinan 328i springs, or the full on B12 Pro kit. Looking to increase performance for backroads and light AutoX without compromising ride quality. This is the first time I've dabbled in modifying suspension, so to say I don't know what I'm doing is an understatement.
It seems like the B12 kit is the most cost effective solution, but I'm a bit worried about the ride quality. I live in SC, and there are 3rd world countries with better roads than ours, so I'm worried about lowering the car. Does it make much of a difference in ride quality? I primarily drive on the highway, which I've heard is where the kit shines. Also worried about the practicality of a lowered car (inclines, putting the car on ramps/jacks, etc.)
BMWP/Dinan springs seem to be the best of both worlds, but rather pricey, and I'm not even sure if the Dinan springs will fit the E82.
Keeping the car on stock springs w/ B6s seems like it will firm up the suspension a bit, while keeping stock ride hight and most of the comfort. However it looks to me like the cost will be equal (if not more than) the entire B12 kit.
If anyone could weigh in on this, it would be greatly appreciated.
|
Here's a recent thread talking about suspension upgrades.
https://www.1addicts.com/forums/show....php?t=1727013
I'm about sure Dinan E90 springs will fit but likely won't be the optimal spring rate or ride height for your car.