Also check connections to the thermostat, water pump and fan.
You can unplug the fan and you should notice the water pump go full speed, as a precaution to cool if the fan is inoperable.
You can unplug the thermostat and should get a notification, same as with pump and well don't run the engine more than a few seconds like that
clean the connectors and ensure they are well seated. Little gremlins like this are often simple mistakes on reassembly from work done. usually gunk in an electrical connector. I 303 all mine when I take them off so they are clean and have easy on and off to confirm it is fully seated.
|