View Single Post
      06-16-2017, 04:51 PM   #97
YarkoDrives
Private
10
Rep
66
Posts

Drives: 135is 98FS, 128i, 335xi,
Join Date: May 2015
Location: CO

iTrader: (1)

No, for these test we cut one of the the can bus wire pairs at the ABS and DME.

The connector at both of these has lots of other wires too.

-----------------

FWIW we ended up just disconnecting the DSC accelerometer under the drivers seat.
- It's a simple connector plug to disconnect
- Reattaching it clears the warning lights without any error set.
- Disconnecting the sensor is legal mod to defeat traction control for SCCA solo Street class.
-- SCCA issued a technical bulletin last year the coding the traction control programs to different factory settings with a factory tool/ software wasn't legal in STREET class. (probably is in Street Touring)
the accelerometer sensor disconnected
-gives the yellow brake warning light.
-defeat the anti-trailbrake anti-overstear program
-defeats all the oversteer and understeer TCS programs
-defeats the Hill hold launch function in Manual Trans cars

downshift rev-match, e-diff, abs, wheel-speed based brake biasing, brake pre-tension on quick throttle lift, and brake fade prediction are still active.
Appreciate 1