digging this up looking to get absolute confirmation on drive shaft spline compatibility between 128i MT and 135i AT
Quote:
Originally Posted by gixracer
Unfortunately a 128 front does not match to a 135 in the splines. They are 1.5mm larger on the 135 side. and you will not be able to tell till you have trashed both ends. i made that mistake when I did my swapon my 328/335 n55 wagon.
|
So this guy says the splines aren't the same between a 128MT / 135iAT driveshaft.
He cites his swap experience, which was a 335i AT/135i MT - different than the 128/135 compatibility.