Thread: M3 LSD in 135i
View Single Post
      10-05-2015, 09:12 PM   #36
Brigadier General
vtl's Avatar

Drives: 2008 BMW 135i MT
Join Date: Apr 2015
Location: Melbourne, Australia

iTrader: (0)

Originally Posted by froop View Post
Quick question, do you know if the diff mounts/bushings for the 135i and the 1M/M3 are interchangeable like the rear subframe bushings?
Yep should be interchangeable:

I am not sure if I should upgrade the bushings now or just later. I will probably just measure the diameter of the bushings so I know what kind of tool to make to pull out the bushings.

I want to keep the downtime as low as possible so I think i will do the bushings at a later date. I don't mind dropping the diff again later, its not that hard of a job.

I will probably do rear guide rods and toe arms before diff bushings though.
Build Thread | MHD Custom Tune | Agency Power DPs | PE Mod Exhaust | 550i Clutch | Wagner FMIC | M3 LSD | Turbosmart Kompact DVs | M3 Control arms | M3 steering rack | KW Competition Coilovers | Dinan Camber Plates | E92 M3 Front Sway | UUC Trans mounts | Nolathane rear subframe bushings | Alcon 355mm BBK | Yokohama AD08R | Apex EC-7 | Schroth Harness | M3 Steering Wheel | LEDs | CIC + Combox retrofit