View Single Post
      11-04-2013, 09:23 AM   #79
Mulie1
New Member
Mulie1's Avatar
United_States
0
Rep
11
Posts

Drives: 2011 128i Convertible
Join Date: Jun 2013
Location: Colorado

iTrader: (0)

Quote:
Originally Posted by BigD128i View Post
3. I used a DIY garage where you can rent a bay and car lift for $20/hr. For seasoned DIYers and if you are trying to minimize costs, this is probably irrelevant, but as this was my first ever DIY car project, having the car all the way up helped. I have ramps and plan to do future oil changes at home, but I will probably go back to this garage to do the transmission and rear diff fluids. If you are in the Dallas area, the place is called MyBay Automotive in Denton. Every 7 hours you buy, you get a free hour. I think there is a similar place in Plano.

I sure wish we had one of these DIY garages in the Colorado Springs area. Also, my first oil change went great. This thread was a big help. The cap was on way too tight and I really needed the socket. I made sure to torque properly and had no leaks, so it looks like no damage was done by the over torque by the shop on the last oil change.
Appreciate 0