View Single Post
      01-10-2013, 12:00 AM   #3
Pig Farmer

Drives: E92M
Join Date: May 2010
Location: Florida

iTrader: (0)

Use the center jack point for the front, and the differential for the rear (obviously not at the same time). Cut a couple blocks of wood to fit in the plastic jack points on the side so that the plastic doesn't rest on the jack stands when the car is lowered on to the stands. They sell aluminum blocks that fit into the plastic jack points but I didn't like the idea of two pieces of metal sliding around. I later figured out that my cheap jack stands would fit perfectly within the plastic jack points when the T-bar is removed from the jack stands. You may need to roll the front wheels up on to a 2x8 to fit the floor jack under the car.