Quote:
Originally Posted by FtheBar.N55
Any tricks to get the service pin out? I have everything set up and for the life of me can not pull that pin out to put tension back on belt. Any help appreciated thanks!
|
You have to put tension on the tensioner pulley arm where you insert the T60 bit. Push the socket/wrench, breaker bar, etc towards the driver's side. You only need move it a little bit to be able to pull the pin out.
Were you able to load the belt with the pin in? I couldn't. I had to get the pin pulled out as the pin was not allowing me to push the breaker bar enough to get the belt over the last pulley.