Quote:
Originally Posted by mad_hatter
Quote:
Originally Posted by Rallysmurf
Got the 15" style 31 et20 wheels on.
Rear no mod required.
Front had to grind down the outside edges of the calipers and a little on rod ends. Also have to remove cone washer so the rod end goes deeper into the knuckle away from the rim.
Little far out with 205 65 winterforce tires. Rally 195 65 have a square profile I think I'll
Be fine with them.
Front might need camber bushings the opposite way to pull the lower arm inboard.
|
https://whitelineperformance.com/pro...-lower-bushing
That's the cheapest option I could find when I was looking.
|
Powerflex has 1.5° but only for the F cars. I'll keep looking around.
I sure appreciate the cheapest option. I just think that it's possible with as big as the bushing is to get more inboard. I was hoping 1".
Might have to go spherical arm here also to turn buckle it off in.
Tire was rubbing pretty harsh at bottom out on today's test drive.