BMW 1 Series Coupe Forum / 1 Series Convertible Forum (1M / tii / 135i / 128i / Coupe / Cabrio / Hatchback) (BMW E82 E88 128i 130i 135i) - View Single Post

AndyW · 11-23-2020, 10:38 PM

1. Does anyone know which wiring harness has the coolant temp line on it? Sensoric module 1 or Sensoric module 2? Thinking of getting a used one off of ebay to swap out - the rotating connection for the temperature sensor on the N55 (N54 seems to not use this type of connector) could be causing intermittent contact.

2. I am also going to try to switch which cooling mode MHD is using to see if it has an effect.

11-23-2020, 10:38 PM	#6
AndyW Supreme Galactic Commander (one galaxy over...) 674 Rep 1,778 Posts Drives: '08 E93, '12 E82, '13 E93 M3 Join Date: Feb 2012 Location: Washington, USA iTrader: (5)	1. Does anyone know which wiring harness has the coolant temp line on it? Sensoric module 1 or Sensoric module 2? Thinking of getting a used one off of ebay to swap out - the rotating connection for the temperature sensor on the N55 (N54 seems to not use this type of connector) could be causing intermittent contact. 2. I am also going to try to switch which cooling mode MHD is using to see if it has an effect. __________________ Best, Andy '12 E82-PS2,Stoptechs,Clubsports+M3 bits,Accusump,Wagner DP+EVO III FMIC,ERCP,BMS Intake,Mason Strut Bar,Wedge Tune
	Appreciate 0 Quote