Quote:
Originally Posted by lowside67
That is definitely not true that the ER will not fit a 265. The fenders are 2.5" wider than stock fenders and many of us, myself included, run wide 255s on stock fenders. ER themselves state that you can comfortably fit a 10" rim with a 10.5" rim max.
The issue is your PSS10s - you have a ton less clearance than the rest of us as your spring perch is not above the tire.
Also wondering why you would spend the money cut and weld the rear to run a low offset 9.5" wheel when you can easily fit that under stock fenders if you just buy the right offset?
-Mark
|
Agreed on the spring perch. Ride height with the PSS10 is also a major limiting factor. I was in a pinch and over fenders were the quick and dirty solution.
With regards to the rears, my thought process there is to run square offsets all the way around so I can rotate tires. I currently fit 255 r888r without modifying the fenders, but with non-front-matching offsets. Thank you for the feedback!