View Single Post
      04-23-2014, 09:59 PM   #2
Brigadier General
Kgolf31's Avatar

Drives: 2007 Z4MC, 2012 128i
Join Date: Sep 2008
Location: Ohio

iTrader: (4)

Skip the E9x sway bar and get a Eibach or something similar. I run a 28mm solid sway bar...

You have enough camber to negate any negative effects from the sway bar, although I'm surprised you can only get -3.2*

IMO, if you really want to help with increase turn-in you should look at setting your alignment with either 0 toe, or a bit of toe out. Obviously some toe-out would be better...but will increase the tire wear on the inner tire.

IMO, in the end you're going to need more tire up front. But IMO some alignment tweaks and a big front bar should help response.