|
Just ordered the following:
TRW upper and lower M3 arms including all related hardware (bolts/nuts etc).
Rear M3 SF bushings including new hardware (those 4 bolts)
ST Suspension E82 sway bar kit (28mm front + 15mm rear including bushings). I went for ST because they are painted black and resemble stock form so i can get away without TÜV for a bit.
Meyle HD sway bar end links front and rear + hardware
M3 headlight level arm + hardware.
Basically i made sure that all the nuts and bolts for any item that would be loosened/removed will be replaced, required or not. Everything should arrive by the end of the week, next week i will start with the RSFB + sway bar first since it is the most labor intensive. Then move to the front end, the KW shop is 15kms away so it will be nice to send the car there once done, get it aligned (-2.0 to -2.3 camber is my goal since i am already at -1.7) and maybe get it a tad lowered (5-10mm leaving room for 245 tires in the future).
That + new winter tires it has been expensive, but there are no track days till..well December. Zolder has a night time track day, would be nice to see if i can get a LSD installed next month, if not no worries, there are snow drift days in Jan/Feb.
|