Quote:
Originally Posted by MMM PWR
Quote:
Originally Posted by GimmeanM
I have the PS4S in 255/275 on the oem rims. I'm also on H&R springs with the revised front fender liners. Also running 10mm spacers all around.
I do notice that they offer much better grip than the PS2s, however up front the initial turn-in response isn't as crisp. I did read somewhere that this is a known characteristic for the PS4S. Not sure if this is made worse by going up to a 255 over the 245?
They do fit fine however. I have a little rubbing when reversing at full lock on the passenger side (likely due to the spacers).
FWIW we have 9" and 10" wheels which is the same as F80 wheels which have the same 255/275 tires, so rest assured they'll fit fine.
If you're at stock ride height and stock ET then you'll have no problems at all.
If I could do it again I might go with stock sizes or 245/275 to help keep that steering feel.
...just my opinion  |
Would like to see pics of your 1M on H&Rs and spacers. |
Don't have any good photos after the fatter rubber. Just these cell pics. Second one is everything before the tires.
The nice pic is no spacers and stock tires.