Quote:
Originally Posted by ajsmithvmi
Thanks!
On a related note, will the lemforder ball joints fit in the non-m suspension arms?
|
Yes it would fit, but the pressed sheetmetal design of the arms do make it harder to press the ball joints in straight. I also would hate to have to do all that effort (including making the washers) just to end up with the aesthetically challenged non M arms.
The curved upper camber arm has an additional benefit in that is provides extra clearance for the M sway bars if you ever wanted to go down that route. Otherwise at full droop the straight non M arm actually touches theM3 sway bars and certain aftermarket sway bars.