Quote:
Originally Posted by ShocknAwe
bNks334
So lets say I did the RB 2 piece kit houtan mentioned, and cut/splice my existing brake wear sensors together rather than get a new set. How do I code the Druckmodell parameters? Assuming I even need to.
I don't want to lose DTC function. I never use DSC, but I drive with DTC generally full time. Only turn off the whole system when I'm specifically out for unbridled hoonery.
|
https://drive.google.com/open?id=0B9...zlFUlpaYXZJTlE
That's everything I've gathered on the functions. Maybe cutting off the pad wear sensors doesn't effect DSC and the sensors are only their for service warnings. Teves documentation only states that the MK60 module contains the function responsible for calculating brake pad wear, which might be the C0F_BBV_KORR_VA/HA functions I actually meant to refer to. You can use NCS Expert/NCS dummy (gives you definitions of the German functions) to play with MK60 settings listed in the above spreadsheet.
Either way, I have no noticeable side effects of cutting off my pad wear sensors and resetting the service light.