Quote:
Originally Posted by viciousgook
On the LCI models equipped with halogens this was not the case, we infact are missing that wire. So I had Stu@bmr help me out with this one.. He jumped the wire from the 2nd socket into the 3rd socket that is normally supposed to function the LED's, with that done, the wire that is jumped acts as a day time running light AND a brake light. The outter section of the tail lights (which is the outter brake light) will no longer function since the wire has been jumped to the third socket, that wire is used to function the running lights and brake lights.:
|
Instead of moving the wire from the second to third pins, one can run a wire from the second to third pin and all lights work, LEDs and the outer brake lights. I am planning to procure, if possible, the correct connector bodies and pins to make a short harness for plug-n-play functionality. I just haven't had time.