|
Just got done with installing the AKG bushings. It took us under two hours. Here are a few details about my experience. Overall, it was not difficult by any means. Everything came apaet easily and smoothly. We used two jacks, a torch and a large, shallow socket to press them out. I think it was a 20mm or so. It took a good amount of heat, to the point where the bushing was smoking a bit. Just be patient and it'll come out. I left the brake lines connected, but we kept a close eye on them the whole time. For the rears, the car's weight wasn't enough to get them out, so I had two friends sit in the trunk. After they sat in there, they came right out. That's about it. If anyone has a specific question, let me know. Like steveAZ said, this is way easier than people make it out to be. If you have the tools and are comfortable using them, you'll be just fine.
|