OK, here's some pics of my splitter...gonna be testing it tomorrow so wish me luck!
Here is the subframe bracket design. I used two.
Here are the mods I made to the undertray with a dremel.
Here are the front mounts. One set through the front plastic frame and two support brackets I bent into shape and attached to a pre-existing bolt.
Here are two pics of the underside, showing the boltup points. Splitter bolts to the aluminum brackets, aluminum brackets bolt to the car with bolts that go through the splitter as well. 8 mount points total to car, 6 mount points splitter to aluminum supports.
Here is the splitter after one coat of spar urethane and one coat of gloss black.
Installed with rubber dam screw points revealed. Honestly, I am not sure if this aspect is going to work. But i had the rubber piece and decided to try it.
Front view.
Side view.
Ready for track day!
