Quote:
Originally Posted by Soterios
Quote:
Originally Posted by BAN_M2
You are not crazy. I am having this same scenario.
I am running the EC7. Fronts sit perfectly on the car with 18x8.5 and the offset Apex recommended. But the rear 18x9.5 sit sunken in. I put a 3mm spacer on and nothing, I think I can probably run a 10-12mm spacer and it would make them sit like the fronts.
|
Crud. The next 'lower' offset is 35, which my spreadsheet says is 29.7mm or 1.17" wider, which is too much I think. I think a 45mm offset would be the answer (3/4" further out than stock)
If you ran a 10mm spacer, you'd actually have the same 'change' as the fronts, so a .65" increase in width to the outside. |
I need to get a set of 10mm spacers to try. My friend has some 12's I might give a shot.