|
Had a similar issue with my ER oil cooler where the male AN fitting was welded to the core. I replaced the ER core with a Setrab core which is just as wide and about 1” shorter. I had to cut the side mounting tabs off the Setrab unit and fabricate a mounting bracket on the top and bottom of the unit out of aluminum L-beam. The Setrab unit is incredibly durable, performs better, and you gain about 1 1/4” clearance at the bottom when you factor in Setrab’s 90 degree fitting? You can find pictures of the setup on my profile page. Keep in mind that the carbon fiber “box” that the cooler is sitting in is the same size as ER’s aluminum box.
|