Hey Peoples,
Just done this today on my 2009 135i, but still got FTM/DSC errors, cruise does not appear to work (though only tried at 50kmph which might not be high enough) AND my reverse camera does not work anymore!
In NCS Expert I loaded the NCS Dummy profile (because initially I was using their info) F1 > F3 > Select E89 > Select CAS > it read data.
Clicked Enter VO/FA > Select E89 > Added $540 to the list > ok
F6 (Back) > Process ECU > Select CAS > ok > OK > change job > fa_write > ok > execute job
Repeated but selected NFRM as the process ecu stage
Selected Code Car which came up with the following error at the end:
[16:48:58.818] [2018-10-18] [SERIE] 2020 Error LFCDHDIA.CPP (A_E65R.IPS/IPO) CDHapiResultText 1
[16:48:58.818] [2018-10-18] [SERIE] SG antwortet nicht IFH-0009: SG nicht angeschlossen oder meldet sich nicht TRSVC70
[16:48:58.939] [2018-10-18] [SERIE] 2020 Error COAPI2.CPP coapiRunCabd 6
[16:48:58.939] [2018-10-18] [SERIE] SG antwortet nicht SG_CODIEREN
NOW, the TRSVC appears to be related to the camera not working, but that as far as I have got.
After this I followed the steps for Tool32 (an dsc87 is the same file for my car)
Cleared any remaining errors in inpa and went for a drive.
As soon as I tried cruise, the FTM/DSC error popped up, and then noticed rear camera was not working while manouevering in my driveway
Soooo I could REALLY do with some help to try and 'check' that VO has actually been written, or something!
TIA!!
PS will test cruise control at highway speed later tonight.