@reisf The camera is oem and displays on the idrive screen.
I have also lost the ability to switch to sport/manual mode via gear lever and steering wheel paddles along with the other steering buttons (didn't use that until today).
Photos here
https://1drv.ms/f/s!Aki7Pe33c8Vwheo5awLlAU6Mlq9MlA
You can see the PDC taking up the whole screen horizontally and it is normally vertically on the right of the rear camera view.
When using ncs expert I can 'see' the trsvc module but not read it. In ISTA/D that section is 'missing' and I assume linked to CIC-GW module (look at photos link)
To clarify: I did a 'code car' and errored on TRSVC module. To code each module manually, do I select ecu, write, repeat for all of them in the list? (Just don't want to make things worse)
EDIT: Have received two errors around 25km ago:
CAS:
K_CAN_Leitungsfehler, Fehler momentan nicht vorhanden, aber bereits gespeichert
92200 km, 92200 km
CID:
K-CAN Fehler, Fehler momentan nicht vorhanden, aber bereits gespeichert
92200 km, 92200 km
Thanks!