View Single Post
      11-17-2013, 01:47 PM   #1
greensto
Wild Card
greensto's Avatar
United_States
91
Rep
683
Posts

Drives: 1M Conversion
Join Date: May 2007
Location: Rockville, MD

iTrader: (2)

Logged My JB4 ISO Today

I just updated my JB4 G5 ISO software today with the latest map (27.7). The Map 5 psi limit is 17.5, however I only hit about 14 psi on runs even though I'm FBO and running 50/50 e85. Any ideas on what could be the issue? Today was 80 degrees in FL, but I also have an AA fmic and 50% e85, so it should be relatively cool. Oil temps remain around 230 degrees with my low temp thermostat. I'm under 30k miles.

http://datazap.me/u/greensto/g5-iso-...w-e85-5050-mix

http://datazap.me/sites/default/file...117_1203_0.csv

This is my log from last year (before I upgraded my fmic, before ISO, only 30% e85). I was spiking 18.4psi
http://datazap.me/sites/default/file...o/G5Map5_0.csv

Video of my Riss Racing exhaust. Think the whistling sound is normal?
__________________

Show me a sane man and I will cure him for you.



Last edited by greensto; 11-18-2013 at 07:54 PM..
Appreciate 0