Quote:
Originally Posted by Nugget
No a shop is doing it, has been installed taken out and reinstalled as they thought it couldn't be right. At the moment the front spring perch hits the wheel and it is sitting like a 4x4.
Trying to figure out if it's them or the kit's fault. But it's looking like spacers may be necessary which is weird as my front wheels are only 8" wide with 225s on them.
|
Remember the kit was designed with only 20mm of lowering and stock wheels in mind. Anything that is not OE offset of width may contact the lower spring perches and wheel spacers may be required. The other option would be using a shorter spring to allow the lower spring perch to sit above the wheels/tires.