|
Before and after Pictures Of the throtte body and intake manifold.
Gave the throttle body a clean with the same compression stabiliser and toothbrush to get it all clean. After pic's include the part that is called the "BOV reference" and all that was required to fit this part was lubing the two o-rings inside the attachment and fitting the E-clip
I also gave the manifold a clean with that spray, then power washed , before replacing gaskets with fresh, new oem gaskets from BMW. There's a random pic of the pool of degreaser/stabilizer fluid that settled in the cleaning container. Included in the bov kit, was a little block off sleeve and cable tie that closes off the existing vacuum port on the manifold.
|