Drive shaft prop shaft rear seal replacement

imported_mega · 04-27-2024, 11:40 AM

Is there any way to replace the drive shaft rear joint grease boot

I really don't want to buy a whole drive shaft just to replace a little seal that's leaking grease. If I have to I'd rather spend money on an axle for a M3 LSD

iminhell1 · 05-07-2024, 05:38 AM

If you're talking that little flexi bit just ahead of the diff, no. It's not serviceable.

Not sure what they go for now but I bought a complete upgraded driveshaft for about $500 made with 1350 u-joints.

imported_mega · 05-07-2024, 07:04 AM

kind of sad that a 3 $ seal destroys a 1300 $ axle, I have not found a source for that seal

RVTed the hell out of it while I wait on parts that may take a long time to get as they are custom.

I have a ford super 8.8 waiting on mount/bracket and custom axles, it will have a standard driveshaft with yolks. Not sure if I'll have the tail of mine welded up or an entirely new axle made

derekitoymd · 12-13-2024, 03:02 AM

Quote:

Originally Posted by imported_mega

Is there any way to replace the drive shaft rear joint grease boot

I really don't want to buy a whole drive shaft just to replace a little seal that's leaking grease. If I have to I'd rather spend money on an axle for a M3 LSD

Mine too has this problem.

Have ypu flund a solution to this?

imported_mega · 12-13-2024, 06:12 AM

Yes I fixed it I had to order a seal from the Ukraine and then Rvt to install it

BMW rear gimbal dust cover (11553453300, 1 155 345 330 007, 1155345330007)
UAH 860.00

Delivery cost: UAH 650.00

*Total amount to be paid:* UAH 1510.00 *(€34.5)*

Thank you for choosing us.
SHEM-Group

04-27-2024, 11:40 AM	#1
imported_mega Colonel 151 Rep 2,213 Posts Drives: various bmw's Join Date: Jul 2007 Location: neverland iTrader: (0)	Drive shaft prop shaft rear seal replacement Is there any way to replace the drive shaft rear joint grease boot I really don't want to buy a whole drive shaft just to replace a little seal that's leaking grease. If I have to I'd rather spend money on an axle for a M3 LSD __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. Driving e82, e72, e85, R53 Gone but not forgotten.. 1974 2002, many various 3s.
	Appreciate 0 Tweet Quote

05-07-2024, 05:38 AM	#2
iminhell1 C2H5OH 4482 Rep 2,183 Posts Drives: 2010 SG 135i auto Join Date: May 2015 Location: Darwin, MN iTrader: (1)	If you're talking that little flexi bit just ahead of the diff, no. It's not serviceable. Not sure what they go for now but I bought a complete upgraded driveshaft for about $500 made with 1350 u-joints.
	Appreciate 1 cerealwars743.00 Quote

05-07-2024, 07:04 AM	#3
imported_mega Colonel 151 Rep 2,213 Posts Drives: various bmw's Join Date: Jul 2007 Location: neverland iTrader: (0)	kind of sad that a 3 $ seal destroys a 1300 $ axle, I have not found a source for that seal RVTed the hell out of it while I wait on parts that may take a long time to get as they are custom. I have a ford super 8.8 waiting on mount/bracket and custom axles, it will have a standard driveshaft with yolks. Not sure if I'll have the tail of mine welded up or an entirely new axle made __________________ You only need two tools in life - WD-40 and Duct Tape. If it doesn't move and should, use the WD-40. If it shouldn't move and does, use the duct tape. Driving e82, e72, e85, R53 Gone but not forgotten.. 1974 2002, many various 3s.
	Appreciate 0 Quote

12-13-2024, 06:12 AM	#5
imported_mega Colonel 151 Rep 2,213 Posts Drives: various bmw's Join Date: Jul 2007 Location: neverland iTrader: (0)	Yes I fixed it I had to order a seal from the Ukraine and then Rvt to install it BMW rear gimbal dust cover (11553453300, 1 155 345 330 007, 1155345330007) UAH 860.00 Delivery cost: UAH 650.00 Total amount to be paid: UAH 1510.00 (€34.5) Thank you for choosing us. SHEM-Group
	Appreciate 0 Quote